From surface to brilliance
Finishing
The finishing workshop gives each piece its final character. Through precise hand-finishing, surfaces are refined and the quality of the entire manufacturing process is revealed.
01 / How we work
Refined
by hand
The finishing workshop brings together specialist handcraft and controlled surface treatment. Across polishing, satin finishing, blasting, perlage, and decorative techniques, each operation refines the surfaces, preserves the intended geometry, and reveals the quality built throughout the manufacturing process.
Finishing supports the piece at every stage, from preparation to final refinement, with each gesture measured to protect lines, volumes, and balance.
I
At Every Stage
Finishing accompanies each piece throughout production. Surfaces are prepared, refined, and corrected as the piece evolves, removing traces of previous operations and ensuring control even in the most difficult areas.
II
The Measured Gesture
Most finishing operations are performed by hand and require absolute dexterity. Each gesture is precise and measured, preserving the lines, edges, and geometries that define the balance of the piece.
III
Surface Techniques
Polishing, satin finishing, sandblasting, micro-sandblasting, micro-bead blasting, perlage, and sunray finishing create distinct surface expressions. Each technique defines a specific interaction with light, from mirror polish to controlled matte textures.
IV
The Plating Workshop
A dedicated plating area applies rhodium and gold finishes through electrolysis. This process enhances surfaces, creates contrasts, protects selected areas, and introduces controlled decorative effects.
V
Masking & Varnish
Masking enables selective finishing, allowing one area to be treated while preserving another. Varnish applied within engravings enhances contrast and definition, reinforcing the clarity of each detail.
02 / In the light
Behind
the work.
Mirror, satin, perlage.
Captured in the finishing workshop.
The hand reveals what the machine prepared.
Finishing · NIRU Geneva
03 / The Craft
Keep exploring
End-to-end under a single roof: 7 divisions, each available standalone or as part of a full-piece development.
01
Design
Sketch, render and prototype. From client intent to validated design.
02
CAD
3D models, technical drawings and manufacturing fixtures.
03
CNC
Production-grade milling of gold, platinum, steel and titanium, held to tight tolerances.
04
Setting
Bead, baguette and claw setting, for diamonds and colored stones.
05
Engraving
Laser engraving for fine decoration, 3D relief, texturing and official marks.
06
Finishing
Mirror, satin, sandblast and plating. Surfaces worked at every stage.
Current 07
Restoration
Restoration of pieces worn, damaged or altered by time.
04 / Across the group
Applied across
the Savoir-Faire
The same teams and the same standard serve watchmaking and jewellery.
One group,
a world of expertise.
